Model Number: KL190B-4K-7-04
Key Specifications/Special Features:
Kelvin 4-channel RF wireless remote control duplicator for cars, garage doors, gates doors, alarm systemsFixed frequency (433.92 or 315MHz) for copying 99.99% common fixed and learning code remote controlsFace to face copy the functions of your original remote by this 4-channel RF remote control duplicator with code learning functions and you'll always have a backupAntenna type:internalModulation type:reliable ASK technologyWorking voltage:12V DCOperating current:12mA
RF output power (ERP) at 433MHz:3-10mW
Transmitting distance:50-150m (150-500ft)
Encoding type: fixed code (2260, 2262, HT12E), learning code (1527, 527, RT1587)
Frequency:315/433MHz, can be customized from 250MHz to 450MHz (SAW filter stabilized)
Channel/button number:2/4 (optional)
Dimensions:62*34*16mm
Weight:25.0g
Operating temperature:-20 to 72°C (-4 to 161.6°F)
Enclosure material:as shown in product photo, plastic or metallic
Other:sleek new case with flashing LED transmission indicator, handsome key chain ring provided
Manufacturing:SMT manufactured
Certifications:CE, R and TTE, FCC compatible
Transmitting distance: transmitting distance is measured LOS (line of sight) with little radio interference, actual distance may vary greatly depending on the installation and operating environment
Certifications: our products are certificate compliant, for more information on either CE or FCC ID
Clear out code:
- Press A and Bat the same time, two seconds later, LED flashes three times, followed bya continuous fast blinking
- Indicates that the remote control code stored was deleted
Duplicating (learning):- Righthands press original remote control A andleft hand press remote control duplicator A, 2 remote controls put together as close as possible, while pressing the remote controls two match button, (eg: A-A, B-B) three seconds later, LED indicator light flashes three times, followed by a continuous fast blinking
Recovery code:
- Press A and C at same time, 3 seconds later, LED indicator light flashes three times, followed by a continuous fast blinking
- This indicates that the original remote control codes have been restored